Awarded at the DIY and Gardening Academy...
Awarded at the DIY and Gardening Academy Trophy, the rainwater collection kit for sand colored rectangular waterway allows to collect about 500 liters of rainwater per m2 of roof per year.
This water can be used for watering your plantations, washing your floors and vehicles or filling a pond.
Suitable for standard duct section 60 x 80 mm.
|2||4,50 €||Up to 9,00 €|
This product is no longer in stock
CAPT'EAU rainwater collection kit for rectangular sand colored waterway is adapted to standard rectangular duct section 60 x 80 mm (90% of the market).
Easily drill a hole with the provided hole saw.
CAPT'EAU system is installed by clipping and is fixed by means of 4 self-drilling screws.
The scoop is 60 x 70 mm or 5 mm of vacuum on each side of the duct, this to avoid overflow to the roof in case of heavy rain
Principle of operation:
- the water coming down from your gutter is centrifuged along the walls, which allows to collect almost all of it during low rainfall.
- By greater rainfall, the flow is limited by the valve section and the surplus is evacuated in the center of the scoop inside the descent of water. The collection of water by sustained rain is of the order of 20 liters per minute.
Parts of the collector:
1 flange + 1 scoop with its tap + 1 exit elbow 90 ° + 1 hole saw + 4 self-drilling screws + 1 foam seal + 1 connection kit to the reserve
No customer reviews for the moment.
Traversée de cloison 1 pouce avec tétine pour tuyau de 19 et 25 m/m + joint autocollant + écrou + Tuyau longeur 30 cm / diamètre 25 m/m.
Set of 4 modular wire winders each composed of 2 crosspieces to clip.